£499.00*
Shipping from £8.99
- Resolution 2560 x 1440 QHD / WQHD
- Diagonal 32"
- panel technology IPS
- Refresh Rate 75Hz
Product information
The 32QP880 from LG Electronics brings the best picture quality to any desk. The IPS display with a screen diagonal of 31.5 inches (80 centimetres) and a native resolution of 2,560 x 1,440 pixels reproduces content with brilliant display quality. The 99 percent coverage of the sRGB colour space, 350 candela per square metre brightness and support for HDR 10 enable a detailed display that is also ideally suited for demanding media editing. The wide connectivity with HDMI, DisplayPort and USB-C (including 96W power supply) as well as diverse ergonomic adjustment options also make the 32QP880 flexible to use in any work environment.
- 80 cm (31.5") monitor in a nearly frameless, slim design
- IPS display with outstanding contrast sharpness
- Native resolution of 2.560 x 1,440 pixels
- Specially optimised picture modes for a detailed display in different use cases
- Consistent colour representation with 99% sRGB
- Flexible connectivity options with 2 x HDMI, 1 x DisplayPort 1.4, 1 x USB-C (DP Alt. Mode, data transfer and max. 96W charging power), 2 x USB 3.0 (Down) and headphone output
- Fast response time of 5 milliseconds for smooth motion display
- AMD FreeSync ensures a smooth image build-up
- 350 cd/m2 brightness and support for HDR 10
- OnScreen Control provides mouse control for particularly easy operation
- Dual Controller Software for simultaneous control of two PCs with one keyboard and one mouse (on the same network)
- Sound system with 2 x 5W power and Maxx Audio for powerful sound reproduction
- High ergonomics due to the flexible adjustability in height, Rotation and tilt as well as pivot function
- Prepared for swivel arms and wall mounts according to VESA FDMI
Technical data
Name | LG 32QP880 32" IPS Monitor, 2560 x 1440 QHD / WQHD, 75Hz, 5ms |
---|---|
Article number | 1000022258 |
GTIN/EAN | 8806091618429 |
Manufacturer SKU | 32QP880-B.AEU |
Model name | 32QP880 |
Brand | LG |
Product Type | Monitor |
Product Series | LG Ultrafine Series |
Technology | LCD Technology LED: LED is a lighting technology. With LED technology, diodes are used as illuminants and not conventional UHP lamps. The advantage of this technology is that the diodes do not use a filament and practically do not consume energy. However, LEDs have a more bluish colour range than UHP lamps, which is why the image is often perceived as somewhat colder. Colour wheel: Besides the DMD chip, the colour wheel is one of the most important criteria for image generation in DLP projectors. The colour wheel rotates constantly at extremely high speed and currently has 3, 4, 5 or, in some cases, even more colour segments. Through the colour wheel, the light from the projector lamp is alternately broken down into the primary colours red, green and blue practically without interruption. In modern projectors, the colour wheel also contains white and sometimes other colours such as cyan, magenta and yellow. With 3 segments, the colour wheel rotates at 3600 or 7200 rpm, with 7 segments at up to 14400 rpm. (4x speed). Each colour perceived by the eye in a DLP projector is therefore an extremely fast sequence of individual, differently coloured light beams until the actual processing. Because this technology sometimes does not use all the colour positions of the colour wheel for high-contrast images, or because the colours required for colour mixing are arranged far apart on the wheel, some viewers recognise the rainbow effect. This characteristic is more noticeable with slower colour wheels and slower rotation speeds than with projectors with faster and more frequently segmented colour wheels. |
panel technology | IPS |
Resolution | 2560 x 1440 QHD / WQHD Resolution Resolution: The resolution of a projector is the maximum number of image points (pixels) that a projector can display based on its naturally existing technology, i.e. without conversion or cropping of the image. The native resolution is the number of pixels that a projector physically has to display the image. A projector usually interpolates a resolution when it receives an image signal with a higher resolution than the native one. If this is the case, there may be a lack of image detail or general blurring in the displayed image. If a projector receives an image signal with a lower resolution than the native, it also interpolates, it scales the image up to the native resolution, calculates corresponding additional pixels, if possible without changing the image information. The disadvantage here is that although the image is displayed larger than fed, the original individual pixels may become much more visible as they are multiplied by the conversion. 4K: 4K refers to the resolution of 3840 x 2160 or Ultra High Definition Television (UHDTV). This resolution corresponds to 4 times the resolution of Full HD. To record films with this resolution, special cameras are needed that can record at around 8 megapixels (4K). Full HD: The term Full HD is used to describe devices that can physically display or output HDTV signals in full (1920 x 1080 pixels). 1080p: 1080p is the specification of the vertical picture lines. Among other things, it refers to the resolution 1920 x 1080. The "p" in this case means full frames, so all picture lines are displayed simultaneously. 1080i: 1080i is the specification of the vertical picture lines. The "i" in this case means fields. This signal is usually displayed interpolated (e.g. by devices with a 1280 x 720 HDready resolution). The interpolation digitally adds pixels, but also offers a slight blurring. In contrast, 1080p playback uses full frames. |
Diagonal | 32" |
Aspect Ratio | 16:9 Aspect Ratio Format: The projected image is output in a format (aspect ratio) specified by the projector. The format is also determined by the resolution of the projector (see also the entry "Resolution"). The screen format is usually selected on the basis of the format of the beamer image. The most common formats are 4:3, 16:9 and 16:10. |
Contrast Ratio | 1,000 :1 Contrast Ratio Contrast: The contrast reflects the gradations between the lightest and darkest point. This is determined from white to grey to black. The higher the contrast, the more precisely the individual gradations between the respective sections can be recognised. In real use, however, the contrast actually only plays a role in darkened rooms, as the light counteracts the contrast. Therefore, contrast plays a rather subordinate role in presentation devices. It should also be noted that the contrast is determined differently depending on the technology. This often results in very different values on paper. Black level: The black level indicates the lowest light value of the projection that is achieved when projecting a black image. The better the black level, the more the dark colours / black tones are emphasised in the image. |
Max. Brightness | 350 cd/m² |
Response time | 5ms |
Refresh Rate | 75Hz |
Support - VESA | 100 x 100 |
Features | Flicker Free |
Product width | 71.42 cm |
Product height | 42.01 cm |
Product depth | 4.57 cm |
Weight | 6.5 kg |
Colour Map | Black |
EEK Spectrum | A to G |
Energy efficency class | G |
Condition | New |
Warranty | 24 Month |
Warranty type | Bringin service Service and support information |
Manufacturer's warranty information:
Here you will find more detailed information on the different types of warranty. The specified manufacturer's warranty is valid at least throughout the United Kingdom. Please refer to our manufacturer overview for contact details and warranty conditions for the corresponding warranty claim. Statutory warranty rights are not restricted by an additional manufacturer's warranty. Our liability for defects is governed by law. Defect rights can be claimed free of charge.